Logiscenter has made a strategic alliance with Uber Eats and Star Micronics to offer you the best preconfigured printers so you just have to take it out of the box and start using it.
Star Micronics printers can be connected quickly and easily to your tablet via Bluetooth . These printers have an auto-connect function that automitcally establish connectivity when tablet goes in and out of range.
Star Micronics TSP143IIIBI Printer Features
- Direct thermal printing
- Resolution: 203 dpi
- Paper Width: 80mm/58mm
- Print speed: 250mm / second
- Internal power supply
- Autocutter included
- AUTOCONNECT Function
- 4 year warranty
How the Uber Eats Printer Works
1. Load paper
The thermal paper used by the printer is 3 ⅛ "wide
Push the cover open lever, and open the printer cover by pulling back on the cover once unlatched.
If the printer does not have a roll in it, load a new roll and make sure the orientation of the paper is correct according to the following diagram
Be sure to also remove a portion of the paper to make sure the paper is loaded correctly.
Push both sides of the cover to close it
2. Pairing the printer via Bluetooth
Make sure Bluetooth is enabled on the iPad
To pair the printer with the iPad, you need to get behind the printer to access the PAIR button. Press and hold the PAIR button for about 5 seconds, and you should see the LED light start blinking green.
On the iPad, look for the printer in the Bluetooth Devices list. The name is: "Star Micronics". Tap the name and the iPad must match.
3. Printing orders
To enable receipt printing, simply go to the Configuration section of your UberEATS control panel and click the Enabled option